Photochemical Transformations of Peptides Containing the N-(2-Selenoethyl)glycine Moiety.

The diselenide bond has attracted considerable attention due to its ability to undergo the metathesis reaction in response to visible light. In our previous study, we demonstrated visible-light-induced diselenide metathesis of selenocysteine-containing linear peptides, allowing for the convenient generation of peptide libraries. Here, we investigated the transformation of linear and cyclic peptides containing the N-(2-selenoethyl)glycine moiety. The linear peptides were highly susceptible to the metathesis reaction, whereas the cyclic systems gave only limited conversion yields of the metathesis product. In both cases, side reactions leading to the formation of mono-, di-, and polyselenides were observed upon prolonged irradiation. To confirm the radical mechanism of the reaction, the radical initiator 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (VA-044) was tested, and it was found to induce diselenide metathesis without photochemical activation. The data were interpreted in the light of quantum-chemical simulations based on density functional theory (DFT). The simulations were performed at the B3LYP-D3BJ/def2-TZVP level of theory using a continuum solvation model (IEF-PCM) and methanol as a solvent.

Visible Light-Induced Templated Metathesis of Peptide-Nucleic Acid Conjugates with a Diselenide Bridge.

The use of template molecules as chemical scaffolds that significantly influence the course of the reaction has recently been intensively studied. Peptide nucleic acids (PNA) are molecules that mimic natural nucleic acids. They are a promising matrix in such reactions because they possess high affinity and specificity in their interactions. The manner of PNA interaction is predictable based on sequence complementarity. Recently, we report the visible light-induced metathesis reaction in peptides containing a diselenide bond. Herein, we present an efficient and straightforward method of the visible light-driven diselenide-based metathesis of peptide-nucleic acid conjugates. Compared to a similar photochemical transformation in peptides, a significant increase in the metathesis efficiency was obtained due to the template effect.

Selenium in Peptide Chemistry.

In recent years, researchers have been exploring the potential of incorporating selenium into peptides, as this element possesses unique properties that can enhance the reactivity of these compounds. Selenium is a non-metallic element that has a similar electronic configuration to sulfur. However, due to its larger atomic size and lower electronegativity, it is more nucleophilic than sulfur. This property makes selenium more reactive toward electrophiles. One of the most significant differences between selenium and sulfur is the dissociation of the Se-H bond. The Se-H bond is more easily dissociated than the S-H bond, leading to higher acidity of selenocysteine (Sec) compared to cysteine (Cys). This difference in acidity can be exploited to selectively modify the reactivity of peptides containing Sec. Furthermore, Se-H bonds in selenium-containing peptides are more susceptible to oxidation than their sulfur analogs. This property can be used to selectively modify the peptides by introducing new functional groups, such as disulfide bonds, which are important for protein folding and stability. These unique properties of selenium-containing peptides have found numerous applications in the field of chemical biology. For instance, selenium-containing peptides have been used in native chemical ligation (NCL). In addition, the reactivity of Sec can be harnessed to create cyclic and stapled peptides. Other chemical modifications, such as oxidation, reduction, and photochemical reactions, have also been applied to selenium-containing peptides to create novel molecules with unique biological properties.

One-Pot Cyclization and Cleavage of Peptides with N-Terminal Cysteine via the N,S-Acyl Shift of the N-2-[Thioethyl]glycine Residue.

We developed a one-pot method for peptide cleavage from a solid support via the N,S-acyl shift of N-2-[thioethyl]glycine and transthioesterification using external thiols to produce cyclic peptides through native chemical self-ligation with the N-terminal cysteine. The feasibility of this methodology is validated by the syntheses of model short peptides, including a tetrapeptide, the bicyclic sunflower trypsin inhibitor SFTI-1, and rhesus Θ-defensin RTD-1. Synthesis of the whole peptide precursor can be fully automated and proceeds without epimerization or dimerization.

Selective ESI-MS detection of carbonyl containing compounds by aminooxyacetic acid immobilized on a resin.

There are numerous examples of bioactive compounds containing carbonyl groups including modified proteins with oxidation of side chain of amino acid residues to aldehyde/ketone groups which are frequently considered as markers of oxidative stress. The carbonyl unit can be also distinguished as a substructure in many illegal drugs including anabolic steroids as well as cations derivatives. Based on chemoselective formation of oximes by solid phase immobilized hydroxylamine derivatives we proposed the protocol for derivatization and selective detection of carbonylated compounds in human serum albumin hydrolysate as a complex peptide mixture and of testosterone in urine samples. This allowed for the removal of the matrix and the qualitative and quantitative analysis of the derivatized analyte by LC-MS/MS (or LC-MRM). Herein we report the preparation and chemical characterization of a novel, ChemMatrix - based resin functionalized with aminooxyacetic acid (AOA). The hydroxylamine moiety in this resin is combined with a peptide linker (GRG) containing an arginine residue to enhance the ionization efficiency. Application of an isotopically labeled carbonylated peptide ((H-Leu-Val-Thr(O)-Asp-Leu-Thr-Lys [13C6,15N2]-OH and testosterone-d3 allowed us to carry out quantitative analyses of detected compounds. Our method is general and may be applied for analysis of carbonylated compounds in biological samples. Our method based on application of functionalized resin allowed to quantify the level of free testosterone in small sample (0.5 mL) of urine, while the non-derivatized testosterone from urine sample was not detected during direct LC-MRM analysis.

Isolation, characterization, anti-MRSA evaluation, and in-silico multi-target anti-microbial validations of actinomycin X2 and actinomycin D produced by novel Streptomyces smyrnaeus UKAQ_23.

Streptomyces smyrnaeus UKAQ_23, isolated from the mangrove-sediment, collected from Jubail,Saudi Arabia, exhibited substantial antimicrobial activity against methicillin-resistant Staphylococcus aureus (MRSA), including non-MRSA Gram-positive test bacteria. The novel isolate, under laboratory-scale conditions, produced the highest yield (561.3 ± 0.3 mg/kg fermented agar) of antimicrobial compounds in modified ISP-4 agar at pH 6.5, temperature 35 °C, inoculum 5% v/w, agar 1.5% w/v, and an incubation period of 7 days. The two major compounds, K1 and K2, were isolated from fermented medium and identified as Actinomycin X2 and Actinomycin D, respectively, based on their structural analysis. The antimicrobial screening showed that Actinomycin X2 had the highest antimicrobial activity compared to Actinomycin D, and the actinomycins-mixture (X2:D, 1:1, w/w) against MRSA and non-MRSA Gram-positive test bacteria, at 5 µg/disc concentrations. The MIC of Actinomycin X2 ranged from 1.56-12.5 µg/ml for non-MRSA and 3.125-12.5 µg/ml for MRSA test bacteria. An in-silico molecular docking demonstrated isoleucyl tRNA synthetase as the most-favored antimicrobial protein target for both actinomycins, X2 and D, while the penicillin-binding protein-1a, was the least-favorable target-protein. In conclusion, Streptomyces smyrnaeus UKAQ_23 emerged as a promising source of Actinomycin X2 with the potential to be scaled up for industrial production, which could benefit the pharmaceutical industry.

Intramolecularly stapled amphipathic peptides via a boron-sugar interaction.

Amadori products (deoxyfructosyllysine derivatives) that can selectively interact with phenylboronic acids and borate ions were synthesized. The intramolecular interactions between the fructosyl moiety and phenylboronic acid incorporated into various positions of the peptide chain were investigated using high-resolution mass spectrometry (HR-MS), circular dichroism (CD), and nuclear magnetic resonance (NMR).

Attempting to synthesize lasso peptides using high pressure.

Lasso peptides are unique in that the tail of the lasso peptide threads through its macrolactam ring. The unusual structure and biological activity of lasso peptides have generated increased interest from the scientific community in recent years. Because of this, many new types of lasso peptides have been discovered. These peptides can be synthesized by microorganisms efficiently, and yet, their chemical assembly is challenging. Herein, we investigated the possibility of high pressure inducing the cyclization of linear precursors of lasso peptides. Unlike other molecules like rotaxanes which mechanically interlock at high pressure, the threaded lasso peptides did not form, even at pressures the high pressure up to 14 000 kbar.

An Optimised Di-Boronate-ChemMatrix Affinity Chromatography to Trap Deoxyfructosylated Peptides as Biomarkers of Glycation.

We report herein a novel ChemMatrix® Rink resin functionalised with two phenylboronate (PhB) moieties linked on the N-α and N-ε amino functions of a lysine residue to specifically capture deoxyfructosylated peptides, compared to differently glycosylated peptides in complex mixtures. The new PhB-Lys(PhB)-ChemMatrix® Rink resin allows for exploitation of the previously demonstrated ability of cis diols to form phenylboronic esters. The optimised capturing and cleavage procedure from the novel functionalised resin showed that only the peptides containing deoxyfructosyl-lysine moieties can be efficiently and specifically detected by HR-MS and MS/MS experiments. We also investigated the high-selective affinity to deoxyfructosylated peptides in an ad hoc mixture containing unique synthetic non-modified peptides and in the hydrolysates of human and bovine serum albumin as complex peptide mixtures. We demonstrated that the deoxyfructopyranosyl moiety on lysine residues is crucial in the capturing reaction. Therefore, the novel specifically-designed PhB-Lys(PhB)-ChemMatrix® Rink resin, which has the highest affinity to deoxyfructosylated peptides, is a candidate to quantitatively separate early glycation peptides from complex mixtures to investigate their role in diabetes complications in the clinics.

Light-Driven Diselenide Metathesis in Peptides.

Peptides containing selenocysteine moieties are susceptible to non-catalytic reactions of diselenide bonds metathesis induced by visible light. In contrast to previously reported radical metathesis of disulfide bridges in cysteine derivatives, this newly developed reaction is fast and clean, and proceeds without decomposition of peptides and without formation of side products. The diselenide bond in peptides was reported in literature to be more stable than the disulfide one and also less susceptible to metathesis induced by thiols and reducing reagents. We demonstrated that visible light induces fast metathesis of Se-Se bonds in peptides. This reaction is important for the folding of peptides containing selenocysteine residues and may find application in designing dynamic combinatorial libraries of peptides responsive to external influence.

Trends in the Design of New Isobaric Labeling Reagents for Quantitative Proteomics.

Modern mass spectrometry is one of the most frequently used methods of quantitative proteomics, enabling determination of the amount of peptides in a sample. Although mass spectrometry is not inherently a quantitative method due to differences in the ionization efficiency of various analytes, the application of isotope-coded labeling allows relative quantification of proteins and proteins. Over the past decade, a new method for derivatization of tryptic peptides using isobaric labels has been proposed. The labels consist of reporter and balanced groups. They have the same molecular weights and chemical properties, but differ in the distribution of stable heavy isotopes. These tags are designed in such a way that during high energy collision induced dissociation (CID) by tandem mass spectrometry, the isobaric tag is fragmented in the specific linker region, yielding reporter ions with different masses. The mass shifts among the reporter groups are compensated by the balancing groups so that the overall mass is the same for all forms of the reagent. Samples of peptides are labeled with the isobaric mass tags in parallel and combined for analysis. Quantification of individual peptides is achieved by comparing the intensity of reporter ions in the tandem mass (MS/MS) spectra. Isobaric markers have found a wide range of potential applications in proteomics. However, the currently available isobaric labeling reagents have some drawbacks, such as high cost of production, insufficient selectivity of the derivatization, and relatively limited enhancement of sensitivity of the analysis. Therefore, efforts have been devoted to the development of new isobaric markers with increased usability. The search for new isobaric markers is focused on developing a more selective method of introducing a tag into a peptide molecule, increasing the multiplexicity of markers, lowering the cost of synthesis, and increasing the sensitivity of measurement by using ionization tags containing quaternary ammonium salts. Here, the trends in the design of new isobaric labeling reagents for quantitative proteomics isobaric derivatization strategies in proteomics are reviewed, with a particular emphasis on isobaric ionization tags. The presented review focused on different types of isobaric reagents used in quantitative proteomics, their chemistry, and advantages offer by their application.

Isobaric duplex based on a combination of 16O/18O enzymatic exchange and labeling with pyrylium salts.

Enzymatic 18O exchange, the well-established approach in comparative proteomics, has some disadvantages such as back exchange of labeled oxygen and overlapping the peak of a labeled peptide with isotopic peaks of an unlabeled one. Herein we demonstrated a simple procedure in which samples digested with a trypsin (with and without H218O) were reacted with unlabeled and quadrupled 13C-labeled pyrylium salt respectively which results in formation of pyridinium cations. Thus, each isobarically labeled peptide containing zero or four 13C atoms in the mass reporter group, during tandem MS/MS forms an unique reporter ion useful for a relative quantitation. Such a sample treatment improves the signal to noise ratio, reduces overlapping of the isotopic peaks and completely eliminates the back exchange problem.

Solid-phase synthesis of peptides containing aminoadipic semialdehyde moiety and their cyclisations.

Pathological levels of oxidative stress (OS) have been implicated in many diseases including diabetes mellitus, neurodegenerative diseases, inflammatory diseases, atherosclerosis, and cancer. Studies of oxidative stress are however complicated by the low concentration of oxidation products. To resolve this problem, we tested a new derivative of aminoadipic semialdehyde (Fmoc-Aea-OH) in the solid-phase synthesis of carbonylated peptides. We prepared a series of peptides with free and acetylated N-terminal amino groups using the Fmoc-Aea-OH reagent. LC-MS, ESI-MS, and MS/MS spectra confirmed the sequences of the modified peptides, although the LC-MS and ESI-MS spectra were dominated by signals corresponding to dehydration products. NMR studies of acetylated products revealed that the dominant product formed in this reaction contains a 1,2,3,4-tetrahydropyridine-2-carboxylic acid residue. Another side reaction in this system was the cleavage of the amide bond between the Aea residue and the amino acid moiety preceding it resulting in the formation of a side product with a six-membered ring at the N-terminus (2,3,4,5-tetrahydropyridine-2-carboxylic acid residue). We found that, depending on the peptide sequence, one of those side products is predominant. Our work suggests new methods for the solid-state synthesis of peptides containing unnatural amino acids.

Self-Synthesizing Models of Helical Proteins Based on Aromatic Disulfide Chemistry.

A new method of synthesis of peptide conjugates with aromatic moieties substituted with two sulfhydryl groups at 1,3-positions is proposed. Amphiphilic peptides derivatized in such a way under oxidative conditions spontaneously form cyclic, covalent trimers and tetramers dominated by α-helical conformations. The tendency to form tri- or tetrahelical bundles depends on sequences of the peptides and on the oxidation conditions, pH, and additives.

Peptides Labeled with Pyridinium Salts for Sensitive Detection and Sequencing by Electrospray Tandem Mass Spectrometry.

Mass spectrometric analysis of trace amounts of peptides may be problematic due to the insufficient ionization efficiency resulting in limited sensitivity. One of the possible ways to overcome this problem is the application of ionization enhancers. Herein we developed new ionization markers based on 2,4,6-triphenylpyridinium and 2,4,6-trimethylpyridinium salts. Using of inexpensive and commercially available pyrylium salt allows selective derivatization of primary amino groups, especially those sterically unhindered, such as ε-amino group of lysine. The 2,4,6-triphenylpyridinium modified peptides generate in MS/MS experiments an abundant protonated 2,4,6-triphenylpyridinium ion. This fragment is a promising reporter ion for the multiple reactions monitoring (MRM) analysis. In addition, the fixed positive charge of the pyridinium group enhances the ionization efficiency. Other advantages of the proposed ionization enhancers are the simplicity of derivatization of peptides and the possibility of convenient incorporation of isotopic labels into derivatized peptides.

The influence of glycation on a high pressure denaturation of ubiquitin.

The combination of deuterium-hydrogen exchange (DHX) and mass spectrometry (MS) can be used for studying a high pressure denaturation (HPD) of proteins. Herein we present the results of investigations of the influence of glycation on the HPD of ubiquitin. Application of various values of pressure causes different degrees of protein unfolding, resulting in molecules with a different number of protons available for exchange with deuterons. The dependence of this number on pressure gives information on the denaturation state of a protein. On the basis of the obtained results we can conclude that increasing number of fructosamine moieties in ubiquitin decreases the pressure required for its denaturation. It suggests that glycation moderately decreases the protein stability. The present study is the first example of application of hydrogen-deuterium exchange as a method of investigating the influence of posttranslational modification of protein on the HPD.

Site-selective solid phase synthesis of carbonylated peptides.

The aim of our research was to design an efficient method for the solid phase synthesis of carbonylated peptides. For this purpose, we designed and synthesized a fully protected derivative Fmoc-amino(2,5,5-trimetyhyl-1,3-dioxolan-2-yl)acetic acid (Fmoc-Atda-OH) of a novel unnatural amino acid (Thr(O)-2-amino-3-oxo-butanoic acid). To obtain the mentioned derivative, two synthetic strategies were investigated using different reagents for carbonyl protection, ethane-1,2-diol and 2,2-dimethyl-propane-1,3-diol. The racemization of oxidized threonine was also analyzed and discussed. We successfully carried out the solid phase synthesis of peptides containing a Thr(O) moiety using Fmoc-Atda-OH according to the standard Fmoc strategy. The application of the designed building block allows the synthesis of peptides containing D,L-Thr(O) residue, which may be used as models of oxidatively modified peptides which occur in biological systems and are related to many diseases.

Selective detection of carbohydrates and their peptide conjugates by ESI-MS using synthetic quaternary ammonium salt derivatives of phenylboronic acids.

We present new tags based on the derivatives of phenylboronic acid and apply them for the selective detection of sugars and peptide-sugar conjugates in mass spectrometry. We investigated the binding of phenylboronic acid and its quaternary ammonium salt (QAS) derivatives to carbohydrates and peptide-derived Amadori products by HR-MS and MS/MS experiments. The formation of complexes between sugar or sugar-peptide conjugates and synthetic tags was confirmed on the basis of the unique isotopic distribution resulting from the presence of boron atom. Moreover, incorporation of a quaternary ammonium salt dramatically improved the efficiency of ionization in mass spectrometry. It was found that the formation of a complex with phenylboronic acid stabilizes the sugar moiety in glycated peptides, resulting in simplification of the fragmentation pattern of peptide-derived Amadori products. The obtained results suggest that derivatization of phenylboronic acid as QAS is a promising method for sensitive ESI-MS detection of carbohydrates and their conjugates formed by non-enzymatic glycation or glycosylation.